without producing distortion or broken acquisitions
for objects moving up to 40 m/s
of 3D scanning of dynamic scenes
with IP65, PoE and thermal calibration
provides 15 million 3D points per second
from 36 cm up to 4 m
New 3D scanning method allows significantly improved signal-readout from transparent, translucent, and glossy objects to provide much more completeness and quality of 3D scans even without the need of using coating and scanning sprays. Allowing to automate previously challenging use cases in logistics, automotive and pharma industries. Thanks to COMPIS this can happen at a fast cycle so it is ready for deployment.
MotionCam-3D now allows you to scan scenes in motion at 2 Mpix resolution. This brings significant improvement to many industrial applications, from inspection and quality control to vision-guided robotics. The 2 Mpix resolution enables faster bin pickings with lower cycle times, less errors, and faster error recovery. Effective resistance to vibrations and non-linear movement allows you to pick object from conveyors or inspect them in motion. Hand-eye setups are now possible to do with minimum stopping and no slow-downs during scan acquisition.
Parallel Structured Light brings the state-of-the-art quality and resolution of structured light scanning into the 3D reconstruction of highly dynamic scenes. This novel patented technology uses a clever sensor design which performs the acquisition in one snapshot as opposed to the sequential scanning of a standard image sensor. This means that the Parallel Structured light method practically freezes the 3D scene in time.
Speed
Quality
The logistics industry needs to keep up with the growing demand of the market. Continuous growth in orders requires modern automation solution that require high accuracy scanning of variety of objects that are dynamic. Implementing conventional vision system may prove difficult, however with the unique abilities of MotionCam-3D it is no longer problem to receive accurate measurements or even objects that are in motion. Read more...
Items on overhead conveyors have unpredictable non-linear movement. They are often swinging and vibrating. This is where MotionCam-3D offers unique value proposition - capturing of highly precise point clouds of even these objects that are moving unpredictably. Read more...
Various industries are demanding a versatile and faster material handling system that does not have to stop. For MotionCam-3D the scanning in motion is no longer a problem. When mounted on robot it offers multi-perspective scanning, without motion blur, thus offering a crystal clear point clouds for further robot navigation Read more
In industry we are often encountering over-sized objects that are very challenging for scanning. Thanks to the large scanning volume of our MotionCam-3D and ability to create a “mesh” of point clouds it is possible to create precise and accurate images of even these oversized objects.
The amount of packages handled is constantly increasing and it is impossible to keep up with the pace whilst satisfying the throughput demands. With MotionCam-3D there is no need to stop the conveyor belt to perform actions. It offers versatility, speed and quality without compromises.
Accurate manipulation of large object within acceptable cycle time is something we often observe in applications as sandblasting, painting or even welding. In order to automate these processes it is necessary to create accurate models which serve as a basis for these activities. MotionCam-3D offers a lot of flexibility and mobility due to its ability to provide continuous stream of high quality data that can be instantly meshed into a accurate 3D model.
Accurate robot navigation for synchronized movement of robot and object on a production line belongs to one of the most complicated automation challenges in any industry. Through utilization of MotionCam-3D and continuous stream of data we are able to establish real time object position tracking and navigation of manipulators.
Inspection of stamped/molded pieces is done with a predefined interval to reduce lost time in stopping the conveyor and production process. This approach is time demanding and done now for only every 50th/100th piece thus increasing costs in case of defect. With MotionCam-3D you can ensure continuous quality check & fast identification of errors and take immediate corrective actions.
The logistics industry needs to keep up with the growing demand of the market. Continuous growth in orders requires modern automation solution that require high accuracy scanning of variety of objects that are dynamic. Implementing conventional vision system may prove difficult, however with the unique abilities of MotionCam-3D it is no longer problem to receive accurate measurements or even objects that are in motion. Read more...
Capture and reconstruct chaotic and unpredictable movements into highly accuracy point clouds for further processing.
Reconstruct accurate point clouds of textured, matte, glossy or even deformed objects.
Produce high-quality images of a variety of food in motion. No need to worry about the color, shape or structure - always get the most accurate point cloud.
Whether you want to recognize small boxes or large packages, there is a right model for you. Enjoy immediate results without motion blur.
Enjoy the high level of detail even on edges and thinner objects. Now you no longer have to worry about inaccuracies caused by vibrations or ambient light.
 S
|
S+
|
 M
|
M+
|
 L
|
 L+
|
|
| Scanning range | 366-558 mm | 630 - 1574 mm | 497 - 939 mm | 630 - 1574 mm | 778 - 3034 mm | 1300 - 3780 mm |
| Camera Mode | ||||||
| Point size | 0.37 mm at 0.9 Mpix 0.25 mm at 2 Mpix | 0.76 mm at 0.9 Mpix 0.52 at 2 Mpix | 0.55 mm at 0.9 Mpix 0.37 mm at 2 Mpix | 0.76 mm at 0.9 Mpix 0.52 mm at 2 Mpix | 1.05 mm at 0.9 Mpix 0.72 mm at 2 Mpix | 1.680 mm at 0.9 Mpix 1.150 mm at 2 Mpix |
| Accuracy | < 0.300 mm | <1.000 mm | < 0.500 mm | < 0.600 mm | < 1.250 mm | 2.050 mm |
| Temporal noise | < 0.100 mm | < 0.150 mm | < 0.100 mm | < 0.100 mm | < 0.150 mm | 0.550 mm |
| See more | See more | See more | See more | See more | See more |
Download software for MotionCam 3D, MotionCam 3D Color, integrations, object localization and calibration utilities.
Downloads
Solve Your Bin Picking Challenges. Overcome Occlusions, Symmetry and more.
ENGLISH 
DEUTSCH 
简体中文 
ESPAñOL 
한국어 
