MotionCam-3D Color

Real-time colorful point clouds

Contact us

Resistant to vibrations & ambient light

without producing distortion or broken acquisitions

No blurry
edges

for objects moving up to 40 m/s

MotionCam3D

Low noise and accuracy

of 3D scanning of dynamic scenes

Industry-ready device

with IP65, PoE and thermal calibration

Computational powerhouse

provides 15 million 3D points per second

Unrivaled scanning range

from 36 cm up to 4 m

3D scanning of transparent,
translucent and shiny objects

Enabling new automation in logistics, automotive and pharma

Clear & complete scans

New 3D scanning method allows significantly improved signal-readout from transparent, translucent, and glossy objects to provide much more completeness and quality of 3D scans even without the need of using coating and scanning sprays. Allowing to automate previously challenging use cases in logistics, automotive and pharma industries. Thanks to COMPIS this can happen at a fast cycle so it is ready for deployment.

Super-fast 3D scanning with doubled resolution

Enabling 2x resolution, 5x faster scanning, 10x more applications

2 Mpix resolution in motion

MotionCam-3D now allows you to scan scenes in motion at 2 Mpix resolution. This brings significant improvement to many industrial applications, from inspection and quality control to vision-guided robotics. The 2 Mpix resolution enables faster bin pickings with lower cycle times, less errors, and faster error recovery. Effective resistance to vibrations and non-linear movement allows you to pick object from conveyors or inspect them in motion. Hand-eye setups are now possible to do with minimum stopping and no slow-downs during scan acquisition.

Now even easier sensor integration with new GigE Vision support

Gige Vision

Available Data Outputs

3D Point cloud example

3D Point cloud example

Normals (nX nY nZ)
Depth Map (Z)
Grayscale Texture
Color Texture (RGB)

Easy setup

The power of Parallel Structured Light

Parallel Structured Light brings the state-of-the-art quality and resolution of structured light scanning into the 3D reconstruction of highly dynamic scenes. This novel patented technology uses a clever sensor design which performs the acquisition in one snapshot as opposed to the sequential scanning of a standard image sensor. This means that the Parallel Structured light method practically freezes the 3D scene in time.

Real Scene

Real Scene

Speed
Quality

Parallel Structured Light

Structured Light

ToF / Active Stereo

Case studies

Dimensioning & measurement

The logistics industry needs to keep up with the growing demand of the market. Continuous growth in orders requires modern automation solution that require high accuracy scanning of variety of objects that are dynamic. Implementing conventional vision system may prove difficult, however with the unique abilities of MotionCam-3D it is no longer problem to receive accurate measurements or even objects that are in motion. Read more...

Overhead conveyors

Items on overhead conveyors have unpredictable non-linear movement. They are often swinging and vibrating. This is where MotionCam-3D offers unique value proposition - capturing of highly precise point clouds of even these objects that are moving unpredictably. Read more...

Hand Eye object manipulation

Various industries are demanding a versatile and faster material handling system that does not have to stop. For MotionCam-3D the scanning in motion is no longer a problem. When mounted on robot it offers multi-perspective scanning, without motion blur, thus offering a crystal clear point clouds for further robot navigation Read more

Scanning of large objects

In industry we are often encountering over-sized objects that are very challenging for scanning. Thanks to the large scanning volume of our MotionCam-3D and ability to create a “mesh” of point clouds it is possible to create precise and accurate images of even these oversized objects.

Picking of moving objects

The amount of packages handled is constantly increasing and it is impossible to keep up with the pace whilst satisfying the throughput demands. With MotionCam-3D there is no need to stop the conveyor belt to perform actions. It offers versatility, speed and quality without compromises.

3D model creation of large objects

Accurate manipulation of large object within acceptable cycle time is something we often observe in applications as sandblasting, painting or even welding. In order to automate these processes it is necessary to create accurate models which serve as a basis for these activities. MotionCam-3D offers a lot of flexibility and mobility due to its ability to provide continuous stream of high quality data that can be instantly meshed into a accurate 3D model.

Assembly in motion

Accurate robot navigation for synchronized movement of robot and object on a production line belongs to one of the most complicated automation challenges in any industry. Through utilization of MotionCam-3D and continuous stream of data we are able to establish real time object position tracking and navigation of manipulators.

Moving objects inspection

Inspection of stamped/molded pieces is done with a predefined interval to reduce lost time in stopping the conveyor and production process. This approach is time demanding and done now for only every 50th/100th piece thus increasing costs in case of defect. With MotionCam-3D you can ensure continuous quality check & fast identification of errors and take immediate corrective actions.

Robust 3D reconstruction in any condition

High level of detail on unpredictable movement

The logistics industry needs to keep up with the growing demand of the market. Continuous growth in orders requires modern automation solution that require high accuracy scanning of variety of objects that are dynamic. Implementing conventional vision system may prove difficult, however with the unique abilities of MotionCam-3D it is no longer problem to receive accurate measurements or even objects that are in motion. Read more...

High speed scenes recognition

Capture and reconstruct chaotic and unpredictable movements into highly accuracy point clouds for further processing.

Glossy, rough, or indifferent textiles

Reconstruct accurate point clouds of textured, matte, glossy or even deformed objects.

Organic materials and their textures

Produce high-quality images of a variety of food in motion. No need to worry about the color, shape or structure - always get the most accurate point cloud.

Large variety of packaging

Whether you want to recognize small boxes or large packages, there is a right model for you. Enjoy immediate results without motion blur.

Small up to large surfaces

Enjoy the high level of detail even on edges and thinner objects. Now you no longer have to worry about inaccuracies caused by vibrations or ambient light.

Specification Sheet

*given measures are in mm
S S+ M M+ L L+
Scanning range 366-558 mm 630 - 1574 mm 497 - 939 mm 630 - 1574 mm 778 - 3034 mm 1300 - 3780 mm
Camera Mode
Point size 0.37 mm at 0.9 Mpix 0.25 mm at 2 Mpix 0.76 mm at 0.9 Mpix 0.52 at 2 Mpix 0.55 mm at 0.9 Mpix 0.37 mm at 2 Mpix 0.76 mm at 0.9 Mpix 0.52 mm at 2 Mpix 1.05 mm at 0.9 Mpix 0.72 mm at 2 Mpix 1.680 mm at 0.9 Mpix 1.150 mm at 2 Mpix
Accuracy < 0.300 mm <1.000 mm < 0.500 mm < 0.600 mm < 1.250 mm 2.050 mm
Temporal noise < 0.100 mm < 0.150 mm < 0.100 mm < 0.100 mm < 0.150 mm 0.550 mm
See more See more See more See more See more See more

Software downloads

Download software for MotionCam 3D, MotionCam 3D Color, integrations, object localization and calibration utilities.

Downloads

Documentation

Technical documentation, user manuals for Photoneo products.

Documentation

Explore Photoneo's Complete Product Portfolio, Patented Technologies, and Proven Case Studies

Free Webinar: Mastering Bin Picking - Solving Occlusions, Symmetry, and More.